DIY Wooden Quadcopter Kit
پک اپ فی الحال دستیاب نہیں ہے
STEM kit · DIY drone · Ages 14+
Build the drone first. Then learn to fly it.
It arrives as a sheet of laser-cut plywood, four motors, two circuit boards and a tube of glue. Over an afternoon or two it becomes a working quadcopter with its own wooden remote control — one they assembled, wired and tested themselves. Nothing needs soldering, and nothing is glued shut: when a propeller snaps, they know exactly which part to change, because they are the one who fitted it.
Three machines in one build
The airframe
Press the plywood parts out of the sheet and glue them into a cross-frame with four round guards around the propellers. Finished, it measures 135 × 135 mm — small enough to fly down a hallway.
The flight electronics
Four motors drop into their mounts, the flight board plugs in between them, and the battery clips on underneath. Every connection is a plug, so there is no soldering iron and nothing to burn.
The remote control
A second board and two joysticks build into a wooden handset shaped like a game controller — left stick for height, right stick for direction. They build the thing that flies it, not just the thing that flies.
How it works
Punch out and glue. Free the parts from the plywood sheet and build the frame and handset, following the illustrated manual. The glue is in the box.
Fit the electronics. Seat the four motors, push the propellers on, connect the boards and clip in the battery. Plug connectors throughout — no soldering, no stripped wires.
Charge, pair and fly. Charge over USB, switch on the handset, and lift off. Start indoors in a clear room, then take it outside on a still day once the sticks feel familiar.
Why a kit beats a finished drone
They learn how flight is controlled
Four motors, no steering, no tail. Wiring them up and then flying it makes the idea land: a quadcopter turns and tilts by spinning some motors faster than others, and the board is doing that arithmetic hundreds of times a second.
Real electronics, no burns
Motors, a flight controller, a transmitter, a rechargeable pack — the same parts as a hobby drone, joined by plugs instead of solder. It is a first circuit build that a parent can leave them to finish.
A crash is a repair, not a bin
Sealed toy drones get thrown away when something breaks. This one comes apart the way it went together, spare propellers are in the box, and fixing it is simply more of the same skill.
Finishing it is the reward
Hours of careful work before anything flies. For a teenager used to instant results, that delay is the point — and the first hover is worth considerably more because of it.
In the box
- Laser-cut plywood sheet, 56 pieces
- Flight controller board
- Remote control board with two joysticks
- Four motors
- Six propellers — four fitted, two spare
- Rechargeable battery and USB charging cable
- Assembly glue
- Illustrated instruction manual
Details
| Pieces | 56 |
| Assembled size | 135 × 135 × 50 mm |
| Recommended age | 14 years and up |
| Assembly | Glue and plug-in wiring — no soldering |
| Power | Rechargeable battery, USB charging |
| Control | Two-stick wooden handset, built from the kit |
| Materials | Laser-cut plywood, electronic components |
| Skills | Model building, basic electronics, flight control, patience |
| Good for | Teen gifts, STEM learning, school projects, first-time builders |
Questions about this kit
Does it actually fly once it is built?
Yes. Four motors lift a light plywood frame, and the handset controls height and direction. It is built for indoor rooms and still air — a breeze will push a drone this light around, so save the garden for a calm day.
Do we need a soldering iron or any tools?
No. The parts press out of the sheet by hand, the wiring uses plug connectors, and the glue is included. A craft knife helps tidy the cut edges, but nothing else is needed.
How long does the build take?
Plan on an afternoon or two, with drying time for the glue between stages. It is a proper project rather than a half-hour assembly, which is exactly what makes it worth doing.
What happens when a propeller breaks?
Two spares come in the box, and they push on and off by hand. Propellers are the usual casualty of learning to fly, and the guards around them take most of the impact first.
This is a build first and a drone second — and the first hover is better because of it.
Safety: for ages 14 and over. Contains small parts, a rechargeable lithium battery and fast-spinning propellers. Keep fingers, hair, faces and pets clear of the propellers, and keep younger children away during flight. Charge on a hard surface, never unattended or overnight, and stop using a battery that swells or overheats. Adult supervision recommended for the first build and first flight.
Shipping & Returns
Orders ship within 24 hours. Delivery takes 3–5 days nationwide, and next day in Karachi.
Need to return something? Just contact us — we handle all requests with care to ensure your satisfaction.





